Success!

So, having finished making my immersion heater and insulating jackets, I found the time to put down a new brew. It's an ale with honey making up the bulk of the extra sugars.

Anyway, I hooked the immersion heater up to my arduino thermostat, with the vat snug in its wet suit, and off it went. I did, however, however, have a slight hiccough with the thermostat. Before plugging it in and leaving it, I decided to do a double-check that everything was working fine. It wasn't. Long story short, my power supply wasn't stable enough to form a stable reference voltage, so the temperature reading varied by +/- ~15 degrees C. Ridiculous... Anyway, I plugged the arduino into my laptop, plugged the charger in, and left the whole lot looking after the beer.

6 days later, it was bottling time.

Homebrew experiments.

As my previous post may imply, I've been playing around with homebrewing beer and with controlling the various processes involved in this. From now on, I plan to post my various prototypes, ideas, plans, and findings here. At the moment my list of things to integrate into my system includes:

-Improved thermostatic control, possibly using a PID system

-Immersion heater for direct heating of the brew, this also saves space

-Electronic hydrometer to tell me the specific gravity of the brew, the alcohol content, and when it is time to bottle

-A convenient, inexpensive, and space efficient method of thermally insulating the brewing vat.

I guess while I'm at it I'll also post the results and recipes of my more experimental brewing attempts.

Homebrew homebrewing thermostat

I've just finished my first protoype of my hombrew thermostat. Here is the schematic:

The source code is available at: http://arduino.cc/forum/index.php/topic,58725.0.html